REBAR
Rebar is a steel bar that is used in concrete construction. By adding these reinforcing steel bars, you're creating reinforced concrete. Whether your project includes floor slabs, walls or posts, rebar helps keep cracks that form from making the project fall apart.
Ladder Joint reinforcing is designed for embedment in the horizontal mortar joints of concrete masonry units.
LADDER WIRE
120 TRUSS WIRE
120 Truss-Mesh is a truss type continuous length joint reinforcement for single wythe walls. 120 Truss-Mesh is embedded into the horizontal mortar joints of masonry walls for superior performance of masonry wall construction
REBAR POSITIONER
RB Rebar Positioners position two rebar in center of block, the simple Z-shaped wire bridges the cell of the block while bends rest on the shell
REBAR POSITIONER
RB-Twin Rebar Positioners have double loops to hold four rebar in the center of the block, the simple Z-shaped wire bridges the cell of block while the bends rest on shell.
WIRE MESH TIE
Mesh Wall Tie (MWT) for bonding intersecting masonry walls
-
Conforms to ASTM A 153 (Hot-dip Galvanized)
-
Conforms to ASTM E 437, Type 304 (Stainless Steel)
-
Materials: ASTM A 82 (Cold-drawn Steel Wire)
-
ASTM A 740 (Hardware Cloth)
REBAR POSITIONER
#3411 Core 12 or 16" Double Rebar Positioner is installed 1-1/4" deep into the CMU instead of on top of the block.
REBAR POSITIONER
#3410 Core Lock 12" and 16"Single Rebar Positioner is installed 1-1/4" deep into the CMU instead of on top of the block.
SERIES 900 TRUSS
Truss Style Adjustable Joint Reinforcement with "Lollipop" style Eyelets and Pintles. Level Eye Truss® is manufactured with double eyes welded 16" O.C. Out-to-out spacing of longitudinal wires and is approximately 2" less than the nominal thickness of the block.
300 TRUSS WIRE
Truss design is a prefabricated reinforcement for embedment in the horizontal mortar joints of masonry.
200 LADDER WIRE
Ladder Series 200 design is a prefabricated reinforcement for embedment in the horizontal mortar joints of masonry. It is manufactured in 10′ 8″ lengths from wire conforming to ASTM A1064/A1064M
800 LADDER WIRE
-
Eyes are double welded on to side wires to provide maximum strength and durability.
-
Level Eyes make it easier to maintain 3/8″ mortar joint.
-
Allows use of 3/16″ side rods.
-
Eliminates weld points that are too thick.
-
Meets ASCE/ACI 530 building code requirements for masonry structures and ASTM A 951 (standard specification for masonry joint reinforcing).
4225 w. ogden ave, chicago il, 60532
3060 s. calhoun rd, new berlin wisconsin, 53151
LANCE CONSTRUCTION SUPPLIES
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
%20(1).jpg)
%20(1).jpg)
%20(1).jpg)
.jpg)
.jpg)
.jpg)