4225 w. ogden ave, chicago il, 60532
3060 s. calhoun rd, new berlin wisconsin, 53151
LANCE CONSTRUCTION SUPPLIES
_edited_edited.jpg)
.jpg)
.jpg)
.jpg)
IPCO
DRIP EDGE CORNERS
2"
IPCO Drip Edge Preformed Inside and Outside Corners eliminate field fabrication of the drip edge corner, providing a much more aesthetically pleasing as well as a better functioning corner condition. The IPCO Drip Edge corners will look better, function better, and eliminate the sharp, protruding drip edge that is typical with field-fabricated drip edge
3"
IPCO
PREFORMED END DAMS
2"
The IPCO Preformed End Dam in stainless steel is specifically designed to be a long lasting product used as an end stop in noncontinuous wall flashing applications. The IPCO End Dam in stainless steel is an important part of the comprehensive IPCO Flashing System, providing another sturdy, long lasting product which ensures continuous moisture barrier protection in masonry walls.
3"
.jpg)
IPCO
IPCO PRIMER
1 GAL
The IPCO Flashing Primer is a rubber based adhesive in a solvent solution, specially formulated to provide superior adhesion with IPCO Rubberized Asphalt Flashing under varied surface conditions. It is an integral part of the IPCO Flashing System and should be used on all surfaces to which IPCO Rubberized Asphalt will be adhered. IPCO Flashing primer is red in color
5 GAL
_edited_edited.jpg)
IPCO
IPCO FLASHING
IPCO Flashing is provided in two thicknesses, 30mil and 40mil. The material consists of rubberized asphalt waterproofing laminated to a tough 4mil high-density, cross laminated polyethylene film. IPCO Flashing is applied by removing the release paper from the rubberized asphalt to expose the adhesive surface. The high-grade commercial adhesive of IPCO Flashing will adhere to virtually any backup wall material, including masonry, concrete and plywood, eliminating flashing blow-offs or tears. When overlapping flashing sections, this adhesive surface adheres firmly to the next section, forming a continuous moisture barrier within the cavity wall
